X-Y-Z Axis Conductive Foam

This conductive foam is difference from above conductive fabric over foam, because it is a conductive polyurethane sponge foam with a conductive fabric bonded to each face. It is available in a range of thickness and can be supplied with or without a conductive adhesive on one face.
The material is easily die-cut and ideal for connector gaskets or where a gap needs to be filled without high compression.
1. The foam is PU foam, and it is conductive.
2. Structure = conductive mesh+ conductive PU foam+ conductive Non-weave fabric

CONDUCTIVE FOAM GASKETS HAVE X, Y & Z AXIS

CONDUCTIVITY FOR MAXIMUM SHIELDING EFFECTIVENESS

Available as standard gaskets, custom designs or sheet stock, durable this Series Conductive Foam has X, Y and Z axis conductivity for maximum EMI shielding attenuation.

The material is ideal for computer, router and telecom I/O shielding. It is offered with or without pressure sensitive conductive adhesive covering the entire mounting surface or with nonconductive adhesive tape in spot application. Constructed from conductive open-cell polyurethane foam, it has nickel over copper-plated polyester fabric on two sides. The fabric is woven on one side and not woven on the other 

 If you need Die-cutted as the drawing ,please see the link of die-cutted EMI gaskets.